MPS SIMULATION ON THE CORIUM MELT FLOW IN CASE OF REACTOR ACCIDENT

Rasito Tursinah(1), Marisa Variastuti(2), Rakotovao Lovanantenaina Omega(3), Asril Pramutadi Andi Mustari(4), Sidik Permana(5),


(1) 1. Nuclear Science and Engineering Department, Bandung Institute of Technology 2. Research Organization for Nuclear Energy, National Research and Innovation Agency (BRIN)
(2) Nuclear Science and Engineering Department, Bandung Institute of Technology
(3) Nuclear Science and Engineering Department, Bandung Institute of Technology
(4) Nuclear Science and Engineering Department, Bandung Institute of Technology
(5) Nuclear Science and Engineering Department, Bandung Institute of Technology
Corresponding Author

Abstract


A simulation model has been made for molten corium in a nuclear reactor using the Moving Particle Semi-Implicit (MPS) method. By setting the value of dynamic viscosity and temperature of corium, simulations are carried out to display the pressure profile and flow velocity of the corium fluid that falls from the RPV to the plenum. In the first simulation to observe the pressure and velocity profile of the corium in the plenum, three conditions were made: the plenum was empty; the plenum was filled with corium fluid, and the plenum was filled with debris. The second simulation was carried out to determine the relationship between the time required for corium to reach the plenum for variations in corium viscosity and temperature values. The simulation results show that the increase in corium viscosity will be proportional to the length of time it takes to reach the plenum. In contrast to the effect of temperature where the increase in corium temperature will be the smaller the time required.


Keywords


Corium; melt; MPS; plenum; viscosity

References


[1] S. Koshizuka and Y. Oka, “Moving-particle semi-implicit method for fragmentation of incompressible fluid,” Nucl. Sci. Eng., vol. 123, no. 3, pp. 421–434, 1996, doi: 10.13182/NSE96-A24205.

[2] G. Li et al., “A review on MPS method developments and applications in nuclear engineering,” Comput. Methods Appl. Mech. Eng., vol. 367, p. 113166, 2020, doi: 10.1016/j.cma.2020.113166.

[3] J. J. Monaghan, “Simulating free surface flows with SPH,” Journal of Computational Physics, vol. 110, no. 2. pp. 399–406, 1994. doi: 10.1006/jcph.1994.1034.

[4] C. G. Koh, M. Gao, and C. Luo, “A new particle method for simulation of incompressible free surface flow problems,” Int. J. Numer. Methods Eng., vol. 89, no. November, pp. 1582–1604, 2012, doi: 10.1002/nme.

[5] T. Tamai and S. Koshizuka, “Least squares moving particle semi-implicit method: An arbitrary high order accurate meshfree Lagrangian approach for incompressible flow with free surfaces,” Comput. Part. Mech., vol. 1, no. 3, pp. 277–305, 2014, doi: 10.1007/s40571-014-0027-2.

[6] A. Khayyer and H. Gotoh, “Modified Moving Particle Semi-implicit methods for the prediction of 2D wave impact pressure,” Coast. Eng., vol. 56, no. 4, pp. 419–440, 2009, doi: 10.1016/j.coastaleng.2008.10.004.

[7] A. Khayyer and H. Gotoh, “A higher order Laplacian model for enhancement and stabilization of pressure calculation by the MPS method,” Appl. Ocean Res., vol. 32, no. 1, pp. 124–131, 2010, doi: 10.1016/j.apor.2010.01.001.

[8] A. Khayyer and H. Gotoh, “Enhancement of stability and accuracy of the moving particle semi-implicit method,” J. Comput. Phys., vol. 230, no. 8, pp. 3093–3118, 2011, doi: 10.1016/j.jcp.2011.01.009.

[9] M. Kondo and S. Koshizuka, “Improvement of stability in moving particle semi-implicit method,” Int. J. Numer. Methods Fluids, vol. 65, no. January 2010, pp. 638–654, 2011, doi: 10.1002/fld.

[10] B. Ataie-Ashtiani, G. Shobeyri, and L. Farhadi, “Modified incompressible SPH method for simulating free surface problems,” Fluid Dyn. Res., vol. 40, no. 9, pp. 637–661, 2008, doi: 10.1016/j.fluiddyn.2007.12.001.

[11] A. Colagrossi and M. Landrini, “Numerical simulation of interfacial flows by smoothed particle hydrodynamics,” J. Comput. Phys., vol. 191, no. 2, pp. 448–475, 2003, doi: 10.1016/S0021-9991(03)00324-3.

[12] M. A. Fadafan and M. R. H. Kermani, “Moving particle semi-implicit method with improved pressures stability properties,” J. Hydroinformatics, vol. 20, no. 6, pp. 1268–1285, 2018, doi: 10.2166/hydro.2017.121.

[13] X. Chen, G. Xi, and Z. G. Sun, “Improving stability of MPS method by a computational scheme based on conceptual particles,” Comput. Methods Appl. Mech. Eng., vol. 278, pp. 254–271, 2014, doi: 10.1016/j.cma.2014.05.023.

[14] X. Chen, Z. G. Sun, L. Liu, and G. Xi, “Improved MPS method with variable-size particles,” Int. J. Numer. Methods Fluids, vol. 80, no. 6, pp. 358–374, 2016, doi: 10.1002/fld.4082.

[15] Y. Li, R. Chen, K. Guo, W. Tian, S. Qiu, and G. H. Su, “Numerical analysis of the dissolution of uranium dioxide by molten zircaloy using MPS method,” Prog. Nucl. Energy, vol. 100, pp. 1–10, 2017, doi: 10.1016/j.pnucene.2017.05.022.

[16] R. Chen, Y. Li, K. Guo, W. Tian, S. Qiu, and G. H. Su, “Numerical investigation on the dissolution kinetics of ZrO2 by molten zircaloy using MPS method,” Nucl. Eng. Des., vol. 319, pp. 117–125, 2017, doi: 10.1016/j.nucengdes.2017.05.002.

[17] D. Wang, Y. Zhang, R. Chen, G. H. Su, S. Qiu, and W. Tian, “Numerical simulation of zircaloy-water reaction based on the moving particle semi-implicit method and combined analysis with the MIDAC code for the nuclear-reactor core melting process,” Prog. Nucl. Energy, vol. 118, no. June 2019, 2020, doi: 10.1016/j.pnucene.2019.103083.

[18] A. Yamaji and X. Li, “Development of MPS Method for Analyzing Melt Spreading Behavior and MCCI in Severe Accidents,” J. Phys. Conf. Ser., vol. 739, no. 1, 2016, doi: 10.1088/1742-6596/739/1/012002.

[19] W. K. Kim, J. H. Shim, and M. Kaviany, “Thermophysical properties of liquid UO2, ZrO2 and corium by molecular dynamics and predictive models,” J. Nucl. Mater., vol. 491, pp. 126–137, 2017, doi: 10.1016/j.jnucmat.2017.04.030.

[20] Jubaidah, G. Duan, A. Yamaji, C. Journeau, L. Buffe, and J. F. Haquet, “Investigation on corium spreading over ceramic and concrete substrates in VULCANO VE-U7 experiment with moving particle semi-implicit method,” Ann. Nucl. Energy, vol. 141, p. 107266, 2020, doi: 10.1016/j.anucene.2019.107266.

[21] A. N. Hidayati, A. P. A. Mustari, A. Waris, Y. Yulianto, and M. Ilham, “Study on Fluid Descends Vertically on Static Fluid Using Moving Particle Semi-Implicit Method,” J. Phys. Conf. Ser., vol. 1772, no. 1, 2021, doi: 10.1088/1742-6596/1772/1/012007.


Full Text: PDF

DOI: 10.55981/gnd.2023.6829

Copyright (c) 2024 GANENDRA Majalah IPTEK Nuklir

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.