POTENTIAL OF RICE STRAW AS A NATURAL FIBER MATERIAL FOR COMMERCIAL PRODUCTS

Lulu Fahriah Lihawa, Itsna Wafiyatul Izzah, Khairum Hawari Qolbiyah Siregar, Kurnia Syarafina Ramadhanti, Harum Azizah Darojati

DOI: http://dx.doi.org/10.17146/jfn.2021.15.2.6206

Sari


Cellulose is a material used in producing natural fibers, which is more environmentally friendly than synthetic fibers. Rice straw waste contains much cellulose and has potential as natural fiber. However, before the natural cellulose fiber is extracted from the rice straw, it must pass through several processes, such as chemicals or nuclear radiation, especially during the pretreatment process. Furthermore, the resulting natural fibers are utilized to replace synthetic fibers for use as raw materials in manufacturing several commercial products. This review describes a process that can be applied to manufacture natural fibers from rice straw and commercial products made from natural cellulose fibers.


Teks Lengkap:

PDF (English)

Referensi


  1. G. Merari, K. Tanuwijaya, and D. Angkasa, "Biokonversi Limbah Jerami Padi Menjadi Nanofiber Selulosa Menggunakan," 2020.
  2. D. Puspa, "Pemanfaatan Limbah Ampas dan Tempurung Kelapa Menjadi Biobriket dengan Variasi Komposisi Bahan Baku," Politeknik Negeri Sriwijaya, Palembang, 2014.
  3. M. Heprizon, "Pemanfaatan Jerami Padi Sebagai Bahan Dasar Pembuatan Super Absorben Polimer Dengan Uji Grafting dan Penentuan Gugus Fungsional Menggunakan Spektrofotometri FT-IR," Universitas Islam Indonesia, Yogyakarta, 2016.
  4. K. Y. Lee, G. Buldum, A. Mantalaris and A. Bismarck, "More Than Meets The Eye In Bacterical Cellulose : Biosynthesis, Bioprocessing, and Applications in advanced Fiber Composites," Macromol Biosci, no. 14, pp. 10-32, 2014.
  5. Y. C, "Pretreatment And Fractionation of Lignocellulosic Biomass For Production Of Biofuel And Value-Added Products," Iowa State University, 2012.
  6. N. P, "Method And System For Fractionation of Lignocellulosic Biomass," US Patent, no. 14, 2014.
  7. H. E, The Chemistry of Cellulose, John Wiley, 1944.
  8. H. P. H, H. W. J. J, L. L. L and B. B. R. R. C, "Literature Review of Physical And Chemical Pretreatment Processes For Lingnocellulosic Bioms," Energy Research Centre of The Netherlands, pp. 8-14, 2014.
  9. H. Darojati, "Prospek Pengembangan Teknologi Radiasi Sebagai Perlakuan Pendahuluan Biomassa Lignoselulosa," Jurnal Forum Nuklir, 2017.
  10. Y. B, J. C, L. T, S. S and K. U. L, "A Comparison of The Efficiency Of Electron Beam Irradiation on Enzymatic Hydrolysis Between 4 Doses Of 25 Kgy And A Single Dose Of 100 Kgy For," J Korean Soc Appl Biol Chem, pp. 385-389, 2012.
  11. H. R. Setiarto, "Prospek Dan Potensi Pemanfaatan Lignoselulosa Jerami Padi Menjadi Kompos, Silase Dan Biogas Melalui Fermentasi Mikroba," Pusat Penelitian Biologi LIPI, Tangerang Selatan, 2013.
  12. S. A. A and N. W. Sutari, "Perlakuan Aktivator dan Masa Inkubasi Terhadap Pelapukan Limbah Jerami Padi," Universitas Udayana, Kuta Selatan, 2007.
  13. E. T. H. Vink, K. R. Rabago, D. A. Glassner, and P. R. Grubber, "Applications of life cycle assessment to Nature Works polylactide (PLA) production," Polym Degrad Stab, no. 80, pp. 403-419, 2003.
  14. N. Reddy and Y. Yang, "Properties of High-Quality Long Natural Cellulose Fibers From Rice Straw," University of Nebraska-Lincoln, 2006.
  15. M. Dashban, H. Schraft and W. Qin, "Fungal Bioconversion of Lignocellulosic Residue: Opportunities & Prespectives," Int J Biol Sci, pp. 578-592, 2009.
  16. Shaky, "Enzymatic hydrolysis of rice straw and corn stalks for monosugars Production," Journal of Genetic Engineering and Biotechnology, no. 9, pp. 59-63, 2011.
  17. Hakkarainen, "Nanofibrillar cellulose wound dressing in skin graft donor site treatment," Journal of Controlled Release, 2016.
  18. Antonius, "Pemanfaatan Jerami Padi Fermentasi sebagai Subtitusi Rumput Gajah dalam Ransum Sapi," JITV, vol. 14, no. 4, pp. 270-277, 2009.
  19. Firsoni, "Dokumen Teknis Pembuatan Pakan Ternak Ruminansia dan Ikan," Pusat Aplikasi Isotop dan Radiasi Batan dan Tenaga Nuklir Nasional, 2018.
  20. A. A and S. J., Metodologi Penelitian Kualitatif, Sukabumi: Jejak Publisher, 2018.
  21. N. D, Penelitian Kualitatif Analisis Kinerja Lembaga, Yogyakarta: Deepublish, 2018.
  22. Y. Chikaoka and K. Nonomura, "Cellulose Nanofiber Applied to Parts of Toyota '86' Sports Car (1)," 2018.
  23. M. Dunky, "Urea–formaldehyde (UF) adhesive resins for wood," Int J Adhesion Adhes, vol. 18, no. 2, pp. 95-107, 1998.
  24. N. Ayrilmis, J.-H. Kwon, S.-H. Lee, T.-H. Han and C.-W. Park, "Microfibrillated cellulosemodified urea-formaldehyde adhesives with different F/U molar ratios for woodbased composites," J Adhes Sci Technol, vol. 30, no. 18, pp. 2032-2043, 20016.
  25. D. Pawlak and P. Boruszewski, "Influence of addition of microfibrillated cellulose (MFC) on selected properties of low-density particleboard," For Wood Technol, vol. 139, no. 102, 2018.
  26. A. Moslemi, M. Z. Koohi, T. Behzad and A. Pizzi, "Addition of Cellulose Nanofibers Extracted From Rice Straw To Urea Formaldehyde Resin; Effect On The Adhesive Characteristics And Medium Density Fiberboard Properties," Isfaham University of Technology, 2020.
  27. A. S. Wargadinata, "FRP (Fiber Reinforced Plastic) sebagai Bahan Dasar Produk Desain," Universitas Trisakti, 2005.
  28. S. A. Muharam, "Desain Dan Konstruksi Kapal Fibreglass Di PT. Carita Boat Indonesia Kecamatan Setu, Kota Tangerang Selatan, Banten," Institut Pertanian Bogor, 2011.
  29. N. Lusi, A. Fiveriati, S. Aprilia and A. P. Irawan, "Analisis Penambahan Serat Jerami Terhadap Karakteristik Kuat Tarik Komposit FRP (Fiber Reinforcement Plastic)," Politeknik Negri Banyuwangi, 2017.
  30. A. Saidah, S. E. Susilowati and Y. Nofendri, "Pengaruh Fraksi Volume Serat Terhadap Kekuatan Mekanik Komposit Serat Jerami Padi Epoxy Dan Serat Jerami Padi Resin Yukalac 157," Universitas 17 Agustus 1945, 2018.


Refbacks

  • Saat ini tidak ada refbacks.


https://makassar.basarnas.go.id/