SYNTHESIS AND CHARACTERIZATION OF CESIUM SILICATE TO DETERMINE ITS DETAILED PROPERTIES AS CHEMISORBED ONTO STRUCTURAL MATERIALS OF LIGHT WATER REACTOR DURING SEVERE ACCIDENT CONDITIONS

I Wayan Ngarayana

DOI: http://dx.doi.org/10.55981/tdm.2023.6803

Abstract


Cesium chemisorption phenomenon strongly contributes to the source terms transport during light water nuclear reactor accidents. Large amounts of cesium silicates are identified to be chemisorbed onto structure material, reduce cesium volatility, and affect the late release and re-vaporization phenomena. Although it has been studied for a long time, several characteristics of these compounds are still under discussion. In this study, Cs2SiO3, Cs2Si2O5, and Cs2Si4O9 were synthesized through the solid-state method and the results have been confirmed using X-Ray Diffraction (XRD) measurement. Furthermore, their crystal structures have been refined based on the XRD analysis. The crystal structure refinement of these compounds proves the previous studies, but with minor distinctions in the lattice parameters. XRD patterns changing over time when measured in the open-air environment also show that Cs2Si4O9 is the most stable species among other cesium silicate species. This indicates that the chemisorbed Cs-Si-O compound onto the structural material as identified by previous studies is most likely Cs2Si4O9 rather than Cs2SiO3 or Cs2Si2O5. Therefore, detailed Cs2Si4O9 identification including its thermodynamic properties characterization could be very useful to enhance the database that is being built to improve current source terms transport codes.








Full Text:

PDF

References


  1. T. Haste, F. Payot, and P. D. W. Bottomley, “Transport and Deposition in the Phébus FP Circuit,” Annals of Nuclear Energy. 2013. 61:102–121.
  2. L. Cantrel, F. Cousin, L. Bosland, K. Chevalier-Jabet, and C. Marchetto, “ASTEC V2 Severe Accident Integral Code: Fission Product Modelling and Validation,” Nuclear Engineering and Design. 2014. 272: 195–206.
  3. G. Brillant, C. Marchetto, and W. Plumecocq, “Fission Product Release from Nuclear Fuel II. Validation of ASTEC/ELSA on Analytical and Large-Scale Experiments,” Annals of Nuclear Energy. 2013. 61: 96–101.
  4. L. Ammirabile, A. Bujan, and M. Sangiorgi, “PWR Medium Break LOCA Source Term Analysis using ASTEC Code,” Progress in Nuclear Energy. 2015. 81: 30–42.
  5. D. L. Hanson, “Validation Status of Design Methods for Predicting Source Terms,” Nuclear Engineering and Design. 2017. 329: 60–72.
  6. B. Ebiwonjumi, S. Choi, M. Lemaire, D. Lee, H. C. Shin, and H. S. Lee, “Verification and Validation of Radiation Source Term Capabilities in STREAM,” Annals of Nuclear Energy. 2019. 124: 80–87.
  7. JAEA, “Fission Product Chemistry Database ECUME Version 1 . 1,” Japan Atomic Energy Agency, Tokai-mura, 2019. doi: 10.11484/jaea-data-code-2019-017.
  8. S. Nishioka, K. Nakajima, E. Suzuki, and M. Osaka, “An Experimental Investigation of Influencing Chemical Factors on Cs-chemisorption Behavior onto Stainless Steel,” Journal of Nuclear Science and Technology. 2019. 00 (00):1–8.
  9. K. Nakajima, S. Nishioka, E. Suzuki, and M. Osaka, “Study on Chemisorption Model of Cesium Hydroxide onto Stainless Steel Type 304,” International Conference on Nuclear Engineering, Proceedings, ICONE, vol. 2019-May, 2019, doi: 10.1299/mej.19-00564.
  10. F. G. Di Lemma, S. Yamashita, S. Miwa, K. Nakajima, and M. Osaka, “Prediction of Chemical Effects of Mo and B on the Cs Chemisorption onto Stainless Steel,” Energy Procedia. 2017. 127: 29–34.
  11. M. Osaka et al., “Results and Progress of Fundamental Research on Fission Product Chemistry - Progress Report in 2015,” Japan Atomic Energy Agency, Tokai-mura, 2016. doi: 10.11484/jaea-review-2016-026.
  12. F. Miradji, C. Suzuki, K. Nakajima, and M. Osaka, “Cesium Chemisorbed Species onto Stainless Steel Surfaces : An Atomistic Scale Study,” Journal of Physical and Chemistry of Solids. 2018. 136: 109168, 2020, doi: 10.1016/j.jpcs.2019.109168.
  13. C. Suzuki, K. Nakajima, and M. Osaka, “Phase Stability of Cs-Si-O and Cs-Si-Fe-O Compounds on Stainless Steel,” Journal of Nuclear Science and Technology, pp. 1–12, Oct. 2021, doi: 10.1080/00223131.2021.1971576.
  14. K. Nakajima, E. Suzuki, N. Miyahara, and M. Osaka, “An Experimental Investigation for Atmospheric effects on Cs Chemisorption onto Stainless Steel,” Progress in Nuclear Science and Technology. 2018. 5 (0): 168–170.
  15. F. G. Di Lemma, K. Nakajima, S. Yamashita, and M. Osaka, “Surface Analyses of Cesium Hydroxide Chemisorbed onto Type 304 Stainless Steel,” Nuclear Engineering and Design. 2016. 305: 411–420.
  16. S. C. Jeon et al., “A Comparative Study on the Cesium Retention Ability up to 1750 °C in Cs–Zr–Si–O, Cs–Al–Si–O, and Cs–Si–O,” Ceramics International. 2019. 45 (12): 15754–15757.
  17. T. Minami et al., “Structural Analysis of Alkali Cations in Mixed Alkali Silicate Glasses by 23 Na and 133 Cs MAS NMR,” Journal of Asian Ceramic Societies. 2014. 2(4): 333–338.
  18. S. Kaneko, Y. Tokuda, Y. Takahashi, H. Masai, and Y. Ueda, “Structural Analysis of Mixed Alkali Borosilicate Glasses Containing Cs + and Na + using Strong Magnetic Field Magic Angle Spinning Nuclear Magnetic resonance,” Journal of Asian Ceramic Societies. 2017. 5(1)7–12.
  19. E. Suzuki, K. Nakajima, M. Osaka, Y. Ohishi, H. Muta, and K. Kurosaki, “Low Temperature Heat Capacity of Cs2Si4O9,” Journal of Nuclear Science and Technology. 2020. 00 (00)1–6.


Refbacks

  • There are currently no refbacks.


PTKRN Digital Library Mendeley
slot gacor slot