PREPARATION OF BARIUM HEXAFERRITE BY SOL GEL SELF COMBUSTION USING POLYVINYL ALCOHOL

N. Idayanti, A. Nuruddin, Suyatman Suyatman

DOI: http://dx.doi.org/10.17146/jusami.2007.0.0.5128

Abstract


PREPARATION OF BARIUM HEXAFERRITE BY SOL GEL SELF COMBUSTION USING POLYVINYL ALCOHOL. Barium hexaferrite powders were produced by sol-gel auto-combustion. Ferric and barium nitrate in the molar ratio of 1:2, and Poly Vinyl Alcohol (PVA) are used as starting materials. After gelation with ammonium hydroxide, dehydration and subsequent mechanical milling, auto combustion and calcination at temperature from 300 oC to 1250 oC were performed to produce barium ferrite powder. XRD pattern showed barium ferrite phase started to form at temperature of 500 oC and grew to single phase at 1000 oC, with hexagonal structure. At this stage, the powder has saturation and remanence magnetization of 50.9 emu/g and 33.6 emu/g, respectively, and coercivity of 2.94 kOe.

Keywords


Bariumhexaferrite, Sol gel auto combustion, PVA

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Jurnal Sains Materi Indonesia

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


Center for Science & Technology of Advanced Materials - National Nuclear Energy Agency of Indonesia
Phone : +62 21-758 74261, +62 21-756 2860 ext. 4009-4010, Fax.: +62 21-756 0926, e-mail: jusami@batan.go.id



preview previewpreviewpreviewpreviewpreviewpreviewpreviewpreview previewpreview

View My Stats
Creative Commons LicenseCopyright © 2019 Jusami | Indonesian Journal of Materials Science. This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License (CC BY-NC-SA 4.0).